Best Materials for Commercial Roofing Irving TX

A damaged roof is a flustering experience for any building owner. Most of the time natural circumstances such as a bad storm results in a loose shingle or penetrations in the roof. The owners are then left with no option but to repair their roof or if the damage is beyond repair, they have to go for replacing it entirely. Whether you opt for repairing or replacing, you must ensure that the material used by the roofing contractor is of the best quality. You must hire the best commercial roofing Irving TX services.
For your convenience, we have discussed in detail, some of the best materials that can be used for commercial roofing Irving TX. These are as follows:

Thermoplastic For Commercial Roofing Irving TX

Thermoplastic is composed of PVC (poly vinyl chloride) and TPO (thermoplastic polyolefin). Both these substances are excellent for roofing because of their high reflection and better weathering properties. Moreover, they are extremely resistant to ultraviolet light and chemicals. Therefore, they are not easily subjected to tears and punctures. Being lightweight, thermoplastic is an excellent material for roofing. Furthermore, it has excellent seam strength and can be used for second-generation applications as well. Thermoplastic can be applied in three ways. These methods are fully adhered, mechanically attached, and point affixed.

• Mechanical attachment methods: In this system, mechanical fasteners attach the thermoplastic to the structure, which add seaming strength.
• Fully adhered methods: Fasteners are not used in this system and therefore they are recommended for systems where fasteners are undesirable. In this system, the membrane bonds to the insulation or other substrate directly.
• Point affixed methods: In this system, the roof membrane is welded directly into the plates. These plate are set at varying intervals.

Ethyline Propolyne Diene Terpolymer (EPDM)

EPDM is a rubber membrane used for roofing. It is greatly resistant to a high dose of ultraviolet light, ozone, weathering, and damage by abrasion. Furthermore, it is also resistant to bad weather such as hail and wind. It can be used for several second-generation applications. It is among the very few substances available in the market, which are environmental friendly as well as sustainable. Its usage in different systems is given below:

• Ballasted Systems: these systems provide for the 35% of the EPDM installations. This provides a great degree of cost effectiveness because of comparatively easier installation and greater speed. These are usually used for construction projects which are large. However, the system should only be used for roof replacement projects which can accommodate 10 to 12 psf of ballast weight.
• Mechanical Systems: These systems are suitable when the roof membranes are attached to the deck by mechanical fasteners. It can be used for buildings of any size.
• Fully Adhered Systems: This system has become more popular because it offers direct contact between the roofing material and the structural deck. EPDM is used in fully adhered applications where mechanical fasteners are not desirable. These are especially useful and ideal for roofing systems of barrels and domes.

Modified Bitumen

An asphalt based material, modified bitumen is an excellent substance for commercial roofing Irving TX. This substance contains either fiberglass or polyester. This material shows high resistance to chemicals and ultraviolet light. Therefore it is not easily subjected to tears, punctures, and foot traffic. This material is a blend of modern and traditional technologies. In this system, the temperature and elasticity of the membrane is modified by using two polymers called Styrene Butadiene Styrene (SBS) and Atactic Polypropylene polymer (APP).
Modified Bitumen for commercial roofing Irving TX offers the following advantages:

• If the bitumen is modified by APP, it offers better resistance and improved tensile strength to foot traffic.
• If the bitumen is modified with SBS, it is less likely to be subjected to brittleness in cold weather and has better elongation as well.
• Both APP and SBS modified systems are available in various colors and have either a granular or a smooth surface.

Built-Up Roof

In this system, various plies of fabrics, felts, and mats, which are laminated with bitumen, are composed. For bitumen, either coal tar pitch or asphalt is used. The material is applied to the structure as alternating layers of bitumen and plies. Finishing of the structure is done with a mineral cap sheet, gravel layer or any weather resistant coat. Built-up roof also called as BUR is custom made so it can meet a variety of waterproofing applications. Therefore, it is not easily punctured or damaged and is one of the few materials suitable for commercial roofing Irving TX.

Metal Roof For Commercial Roofing Irving TX

In case of metal roof, R-panels, standing seams or corrugated metal panels are fastened together and mechanically attached to the roof structure. Metal roofs have a variety of options to offer the building designers and architects. Metal panels are available in various colors and designs. Metal roofs are excellent for commercial roofing Irving TX because they provide excellent durability, fire resistance, and strength. These roofs are highly preferred because their sustainability and higher energy efficiency.

Sustainable Solutions

In order to build environmental friendly roofs, various options have been invented. Apart from being less expensive and sustainable, these options are also perfect for your commercial roofing Irving TX. These include light tubes, photovoltaic solar panels, and prismatic skylights. Usage of a reflective surface to divert the radiant heat back and stop it from entering the building is one way to build a sustainable roof.
These are some of the great ways to build a commercial roofing Irving TX. If you are looking for a roofing service in Irving, then Anderson Industrial Roofing is just the option for you.
Source
http://www.rosselliroofingandsiding.com/