Why is Polyurethane Foam Roofing in Dallas, TX So Popular?

Polyurethane Foam Roofing in Dallas, TX has been around since the 60s and 70s when it hit the mainstream roofing market. Unfortunately, many have associated numerous myths with the Polyurethane Foam Roofing in Dallas, TX so much so that most roofers in Dallas, TX do not even think it as remotely funny. The most probable reason is that most people have come across different kinds of foams, which may cause considerable confusion.
The Polyurethane Foam Association has estimates that around 2 Billion pounds of flexible polyurethane foam products are being manufactured in the United States alone. The baseline for all these products is that they are modified plastics filled with micro bubbles to put it in simplistic terms. Here are 10 reasons why Polyurethane Foam Roofing in Dallas, TX is so popular.

1.    It has been around for years

Ever since groundwork on it began in the late 30s by German Industrial Chemist Otto Bayer and his talented team, there has only been improvement. First, in the early 50s there were the polyisocyanates, and in 1954 flexible polyurethane was made commercial. Interestingly, when they first came out, the team of inventors called it imitation Swiss cheese because of the way it looked. The final product for the roofing market that we know today came to be almost half a century ago and the houses that have Polyurethane Foam Roofing in Dallas, TX may have been around since the early 90s.

2.    The Birds Enjoy it

The Polyurethane foam roofing in Dallas, TX that has visibly reached the peak of its life is invariably going to attract birds. They will peck away at the rotten patches of the roof, and make a bad situation worse.  Fortunately, those incessant birds can be stopped, by a fresh coat or acrylic caulking to the damaged area. But beware! There might be things such as moisture that may have seeped through which can cause problems later on. Don’t forget to contact your trusted roofers in Dallas, TX.

3.    It is Relatively Inexpensive

The cost of polyurethane roofing is easily at par, if not lesser in cost than your average BUR or single ply. It’s got the added edge of a high R value at essentially the same price if not lesser. Oil price fluctuations cause the price of BUR, EPDM and TDO, etc., to rise; whereas, the prices of Polyurethane Foam Roofing in Dallas, TX to remain stable. This is because there are cheaper renewable sources that are being used as the primary material used for the roofing in Dallas, TX.

4.    Timely installation and replacement set you up for life

Once you have bought the foam, you have been set up with a roof for life. Given that the installation was done by professional and certified roofers in Dallas TX. Other roofs would require tremendous amounts of labor and other costs if the time came for replacement. But all it takes is a nice, even spray to get the roof looking brand new. Get professionals to come and repair the roof as soon as you spot signs of wear. Often times when the damage occurs, it is too late when the cavalry is called and it becomes next to impossible to correct the damage without incurring extra costs. Moisture, dust and other particulates may creep inside the damaged roof and affect its integrity.

5.    It works better than Foam Boards

Foam boards are basically sheets of the same material (Polyurethane) spread and rolled across the roof to fit like pieces of a jigsaw puzzle. Moisture may still make its way in through the seams between the boards, making that moisture a danger to the integrity of the roof. Torrential summer downpours in Irving, TX may make this a possibility for existing homes with foam board roofs. On the other hand, the Polyurethane Foam Roofing in Dallas, TX allow for better and seamless integration with your existing roof. Roofers get all of the rubble, gravel and debris out of the way before they get started to make sure they get you that promised seamless integration with your existing roof.

6.    You can walk on it

Contrary to popular belief, you can walk on Polyurethane foam roofing in Dallas, TX without having the stealth of a Navy SEAL operative. The initial curing time of 24-48 hours is when the foam is settling and it is inadvisable to go near it. After that, it is inert and completely safe to walk on. The foam itself at the time of spraying is toxic, so you have to be careful at the time it is being installed. If you have a business, make sure that your employees are not allowed on the rooftop area. Otherwise, you may have a lawsuit on your hands, so beware. Also avoid overdoing the walking too much. The commercial flat roofs are notorious for causing dust and natural debris from trees to go into you or your employee’s eyes and cause blindness.

7.    It saves on Energy

We saved the best for last. The energy saving that you get on your HVAC bill if the roof installation is done immaculately, will put a huge smile across your face and a big increment of profits in your business. This is because a polyurethane foam coating provides some of the best insulation ever witnessed. That means cold air from the AC stays in during the summers and the heat stays in during the winters so you don’t have to worry about having high energy bills (given of course that your HVAC equipment is up to date and well maintained).
Get your friendly professional roofers in Dallas, TX at Anderson Industrial Roofing to evaluate and inspect your roof so they can recommend you the best roof for your needs.