Eleven-Benefits-Of-Using-Polyurethane-Foam-Roofing-Roofer-in-Fort-Worth-TXAlthough you might not give it much thought, roofing forms an essential part of a house. Since there exist different materials for roofing, the right material can be ideal to meet your specifications. One such example is that of spray polyurethane foam roofing in Fort Worth, TX. Spray polyurethane foam has been utilized in roofing for greater than 45 years, not to mention it has also been used as a material for insulation.

Polyurethane Foam: An Overview

A mixture of isocyanate and polyol, spray polyurethane foam roofing in Fort Worth, TX is made when these two elements are supplied via a proportioner which is then heated in order to pump the two distinct components into the spray gun. They are then blended and sprayed onto a substrate. As the polyurethane foam roofing in Fort Worth, TX is sprayed in the form of a liquid, the resulting structure that takes shape is single and continuous.

When using polyurethane foam roofing in Fort Worth, TX, it is important to ensure that the surface is clean, is not be contaminated with the likes of oil, and according to the proper codes of the building, well tied up with the substrate. A protective elastomeric top coat can also be sprayed or done manually or by the use of power rollers.

Benefits of Foam Roofing Over Traditional Methods Used for The Purpose of Roofing

Compared to conventional methods of roofing, the use of foam roofing can have its benefits. Some of them include:

1.    Foam roofing is free of seams

Since it is in a liquid state that polyurethane foam roofing in Fort Worth, TX is applied, the roof gets coated in a single monolithic membrane that is the result thereof. Where there can be leaks when it comes to a traditional roofing method, there is less need to worry about that situation when you have polyurethane foam roofing in Fort Worth, TX because it is free of joints or seams.

2.    Foam roofing is flexible

The capability of the foam is its ability to be sprayed on that extends to virtually any surface. Making it flexible and a useful property that covers a wide range of roofing surfaces.

3.    Foam roofing is lighter

Foam roofing has the capability of being lightweight, usually around 50 lbs. per square. While roofs that are built-up can weigh 800 lbs.

4.    Foam roofing requires less maintenance

Foam roofing does not require much maintenance. With a lifespan that is indefinite, small amount of wastage is produced.

5.    Foam roofing provides insulation

Spray polyurethane foam roofing in Fort Worth, TX can provide insulation even for commercial construction projects.

Benefits of Spray Polyurethane Foam Roofing

1.    Top R value

The R value for sprayed polyurethane foam roofing in Fort Worth, TX amounts to 7.14. For less material, this property is capable of offering more thermal resistance.

2.    Removes ponding water

If your roofing suffers from ponding water, you can get an amplified thickness of polyurethane foam roofing in Fort Worth, TX for those low areas to eliminate the ponding water factor. Building up or filling those low areas, in addition to giving your roof a slope can assist in the proper drainage of water.

3.    No smell

Another property of sprayed polyurethane foam roofing in Fort Worth, TX is that it is odorless.

4.    Resists mildew or fungi

Sprayed polyurethane foam roofing in Fort Worth, TX also has the ability to resist attack by mildew and even fungi.

5.    Free of seams

Being free of seams or joints, you can say that sprayed polyurethane foam roofing in Fort Worth, TX is seamless regardless of the square feet size of your roof. This ability prevents water to seep through the structure of the roof and getting inside the building, especially in the case of heavy rain. It can also prevent air to pass through the roofing structure so that there may be no passage for cold air through the roof in the case of extreme winters.

6.    It is lightweight

Polyurethane foam is said to weigh 2-3 pounds per cubic foot. Even if you have an inch of polyurethane foam roofing in Fort Worth, TX, you may have an elastomeric coating of 30 mils that may weight around roughly 60 pounds for every 100 square feet being the case for the usual roofing systems that are four-ply built-up. If you are thinking of reroofing then sprayed polyurethane foam may save you the hassle of removing a built-up roof that already exists on which you can apply over.

7.    Variety of applications

Polyurethane foam can be used on many different types of roofs. Whether it may be pitched, flat, domed, saw-toothed, old, new, or even if it has slopes or configurations that are atypical.

Polyurethane foam can also be sprayed onto the likes of coolers, tanks, freezers, ductwork, piping, and even different projects related to the field of aerospace.

8.    They are firm

Sprayed polyurethane foam is strong and lightweight. It also does not have a tendency to sag.

9.    Lasts for longer

The elastomeric coating that forms the protection system of polyurethane foam roofing in Fort Worth, TX has the capability of rejuvenating if you reapply further coatings on it. Reapplication of further additional coatings can be when your other coating systems previously applied have become worn out because of being there for a very long time.

10. Can be applied easily

The ability that enables polyurethane foam to be applied through spraying makes its application easy. It is also said that the application does not take very long and can be completed in a comparatively smaller time frame depending on the size of the area it is to be applied upon.

11. Minimum maintenance required

Depending on the type of repairs or alterations that you require to the polyurethane foam roofing in Fort Worth, TX at your building, if they are minor changes or repairs then not much is required for its maintenance process. This can also be done at a cheaper rate, depending if the repairs and alterations required are minimal.

For roofing solutions, call Anderson Industrial Roofing.