Why Use Polyurethane Foam Roofing in Fort Worth, TX

When installing a new roofing system for a commercial establishment, polyurethane should be your choice. Let’s discuss what it is before moving on to why that is the case.

What is Spray Polyurethane Foam (SPF)

Spray polyurethane foam, which is commonly called SPF in the commercial market, is a plastic material that is sprayed in liquid form. It acts as a great insulator and expands several times its original size immediately after spraying, creating a thick watertight layer. This layer is used as roofing material.
The origin of SPF usage as a roofing material dates back to the 1960s. With its capacity to lower the annual cooling and heating cost by 30%, SPF had been a popular choice for large businesses. The material is mainly used for its various advantages and its exceptional strength nowadays as it turns into a strong solid surface, a few minutes after its application.
If you are looking for a reliable roofing system and live in Fort Worth, then use polyurethane foam roofing in Fort Worth, Texas for your commercial building’s roof.

Advantages of using SPF

Here are a number of reasons why polyurethane foam roofing in Fort Worth, Texas is an excellent option for your roofing issues.

1.    Seamless

The most obvious advantage of using SPF is its high degree of seamlessness. SPF provides a seamless roofing system, which is ideal for commercial roofing. There are no joints once the liquid spray dries up into an insulating roofing system. This reduces the chances of outside air and water entering through the roofing system and affecting the building structure. Irrespective of the size of the roof, there will be no seams, making polyurethane foam roofing in Fort Worth, Texas the best roofing option.

2.    Eliminates Flashing Leaks

SPF is an ideal choice when it comes to roof penetrations, parapet walls, and roof mounted equipment since it sticks to the substrate on installation and it is a seamless system. It is perfect to use on roofs where various equipment is installed including pipes, vents, stacks, skylights, HVAC equipment, and cooling towers. It is also an excellent choice because it solves the most recurring problem of roofs that is roof leaks, which are usually caused because of faulty flashings. Therefore, in order to take care of the flashing leaks, polyurethane foam roofing in Fort Worth, Texas is the right choice.

3.    Light Weight

SPF is a lightweight option for the roof system of your commercial building. It weighs around 2 to 3 pounds per cubic feet. Being lightweight, the SPF coating along with additional elastomeric coating does not affect the thickness of the roofing system to a great degree. This not only renders the SPF a reliable option for roofing but also for re-roofing since it can be applied to an existing roof without feeling the need to remove it.

4.    Elimination of Ponding Water

Ponding is among the biggest roofing problems. This issue can be resolved by using polyurethane foam roofing in Fort Worth, Texas for commercial buildings. Adding an extra layer of polyurethane foam can eliminate the ponding water in the low areas. While building up the low areas is a great way to deal with the problem of ponding water, increasing the slope of the roof can also work wonders in solving the issue as it helps with proper drainage. This will also keep the additional load factor in check that results because of water accumulation.

5.    High “R” Value

One of the biggest advantages of using polyurethane foam roofing in Fort Worth, Texas for your commercial building is its high “R” value. For SPF, this value is 7.14, which allows it to provide greater thermal resistance even with less material. This may not be true for various other insulating materials.

6.    Higher Chemical Stability

Sprayed polyurethane foam is extremely resistant to attack by fungi and mildew. While it is highly inert, it must still be provided some protection from sunlight. This can be done by using an ultraviolet resistant elastomeric coating. This coating is odorless and has no nutritive value. Therefore, you should use polyurethane foam roofing in Fort Worth, Texas for stable and resistant roof systems.

7.    Thermal Shock Minimized

Using polyurethane foam roofing in Fort Worth, Texas on your industrial building is also advisable because it renders the building resistant to thermal shock. Its capacity to keep the building safe from these shocks, which happens as a result of fluctuations in outdoor temperature, is because of its higher “R” value and its being seamless.

8.    Versatility

Sprayed polyurethane foam can be used for a wide variety of roofs. It may be used for new as well as replacement roofs, pitched, whether flat, domed, saw-toothed roof and even for roofs with unusual configurations and slopes. It is also perfect for spray application on various structures including tanks, coolers, ductwork, freezers, piping, and several aerospace projects.

9.    Rigidity

Despite being lightweight, the sprayed polyurethane foam is ideal for usage because of its strength. It will neither pack down nor sag.

10.                  Flexibility

The SPF coating is a great choice for roofing since it is highly flexible to contraction and expansion of structures. Moreover, it adjusts to the expansion process without compromising on its ability of keeping the structure sheltered from foreign elements.

11.                  Watertight

Another reason why polyurethane foam roofing in Fort Worth, Texas is a great option for roof systems is because it is watertight. It is made up of billions of cells, which are minute and closely bonded together, resisting the water penetration. However, you must add an elastomeric coating, which will be suitable for a particular environment.

12.                  Long Lasting

In case the initial coating layer has withered because of the passing of several years, you can reapply an additional coating of the elastomeric coating system to prolong its performance. This cannot be done in case of other roofing material and this makes SPF stand out among the rest.

13.                  Ease of Application

Sprayed polyurethane foam is easy to apply and the job will be done in a short time period. It can be applied without causing any disruptions if the services of a qualified, reputable, and experienced contractor are sought.
Are you looking for a reliable company to provide you with quality roofing services? Contact Anderson Industrial Roofing to get good polyurethane foam roofing in Fort Worth, Texas for your commercial building.